AccuPro 360ST

Professional quality rotary spreader with SmartSpread™ technology for the precise application of granular fertilisers

The AccuPro 360ST is a professional rotary spreader with SmartSpread™ technology for precise fertiliser application. It features a robust stainless-steel frame, maintenance-free gearbox, and a 30kg capacity hopper. Additional features include pneumatic tyres, an ergonomic handle, and a removable rain cover. Designed and built to meet the highest standards of turf management.

SmartSpread™ is an advanced system that ensures even and precise distribution of granular fertilisers, essential for achieving consistent and uniform application every time.

Controlled Delivery and Uniform Application: Located under the hopper, SmartSpread™ directs granules on the impeller based on their size and weight. For example, applications of ProTurf or Sierrablen Plus, which consist of larger and heavier granules, are directed towards the centre of the impeller to gain the necessary centrifugal force for effective spreading. Conversely, applications of products like SierraformGT, which consist of smaller and lighter granules, are placed closer to the outer edge of the impeller where less force is required for even distribution. This precise adjustment ensures each granule type is accurately accounted for, resulting in an optimal spread pattern and promoting uniform turf health.

Precision Nutrition: Use the correct ‘numbered’ spreader setting in combination with the ‘lettered’ SmartSpread™ settings for all ICL-branded fertilisers. Always check the effective width of coverage.

  • SmartSpread™ - Ensures precise application every time.

  • Maintenance-free gearbox - No greasing required, ensuring smooth and consistent performance with minimal upkeep.

  • Stainless-steel frame - Built for durability, withstands frequent use and harsh conditions, providing long-lasting reliability

  • 30kg capacity hopper - Shaped to enhance the flow of granules to the impeller, preventing clumping and ensuring a continuous, smooth flow of material.

  • Removable rain cover - Protects the product if being applied during adverse weather conditions.

  • Pneumatic turf tyres - Distributes weight evenly, preventing turf damage and ensuring smooth mobility across different surfaces.

  • Ergonomic handle - Designed for comfort, reducing operator fatigue during extended use.

  • Open/Shut-Off control - Easy control of material flow, enhancing operational efficiency.

  • Integrated front handle - Allows for safe and simple lifting, making transportation and handling easy

  • Three year warranty - The spreader comes with a three year limited warranty.

1
Pre-use inspection: Before using the spreader, ensure it is clean and free of debris from prior usage by conducting a thorough inspection.
2
Material check: Ensure the material to be used is in good condition, free-flowing, and compatible for use in a precision rotary spreader.
3
Setting the aperture: Ensure the on/off lever is in the closed position. Select the correct setting on the SmartSpread™ by choosing the letter corresponding to the fertiliser being applied. Select the desired application rate on the 1 to 25 scale located on the handle by locking the setting screw at the corresponding number. Further information on application rates of specific ICL products can be found on ICL websites or through ICL-appointed retailers.
4
Filling the hopper: Ensure the control lever remains in the off/closed position before filling. Fill the hopper uniformly. Always fill the hopper in a safe place away from areas where any accidental spillage while filling could cause damage.
5
Spreading material: Push the spreader at a brisk walking speed of approximately 5 km/h, always keeping the impeller parallel to the ground. With the upper gauge and the SmartSpread™ lower gauge set in the desired positions, push the handlebar on/off lever forwards to the setting stop, while simultaneously starting forward motion. Always begin moving forward at the same time as pushing the lever forward to the on position. At the end of each run, pull the on/off lever back to the zero position to stop material flow and cease spreading. The spread width of the material varies with different fertiliser types. Always check the spread width of the product to ensure correct spread distances. Detailed information on the spread width of specific fertilisers can be found on the ICL websites or through ICL appointed retailers.
6
Cleaning and after-use instructions: Always empty any leftover product from the spreader when the application is complete, disposing of any excess material correctly. The best way to empty unused material from the hopper is by inverting the spreader. Further action may be required to clear any remaining material if necessary. Wash the hopper thoroughly with clean water particularly around the agitator and the underside of the hopper. Drying of excess water is recommended. Do not reuse the spreader until it is dry.

Have a question or want to know more?

thumb

Our products

Outstanding products that will deliver perfect grass

Explore our products
thumb

Our brands

Leading and renowned brands in turf & landscape

Explore our brands
thumb

Our knowledge

Tips & tricks, disease prevention, scientific results and more

Explore our knowledge hub