Ecoplug Max

Ecoplug Max is a treatment for tree stumps to minimise root and stump sprouting.

Ecoplug Max is a plug treatment for tree stumps that releases glyphosate into the stumps to minimise root and stump sprouting.

  • 95 - 100% efficacy on treated stumps, preventing re-growth

  • 100% selective with no effect on surrounding trees or vegetation

  • Reduces the interval between clearing by 50 - 100%

  • Supports requirements of the sustainable use directive to minimise use of pesticides

  • Technology Total herbicide

  • Pack size 100 plugs

  • Contains 300mg granular glyphosate

  • PCS number 05595

Stump in diameter in cmNumber of Ecoplugs
Group 1:
Alder, Aspen, Beech, Birch,
Elm, Lime, Maple, Mountain Ash, Willow
3-6cm
6-10cm
10-14cm
14-18cm
>20cm
1
2
3
4
6-8cm between plugs
Each buttress root1
Group 2:
Ash, Cherry, Bird Cherry, Oak
3-6cm
6-10cm
10-14cm
14-18cm
>20cm
2
3
4
6
5-6cm between plugs
Each buttress root2
Group 3:
Poplar, Rhododendron, Elder,
Tree of Heaven
3-6cm
6-10cm
10-14cm
14-18cm
>20cm
2
4
6
8
3-4cm between plugs
Each buttress root2
Stump in diameter in cm
Number of Ecoplugs

  1. Cut the tree as close to the ground as possible
  2. For optimum results, treat within 2 days of cutting; however, stumps can be treated up to 1 month after felling, but translocation of active ingredient may be slower
  3. Measure the diameter of the cut face and calculate how many plugs to use from the application rate table
  4. Drill a hole in the stump; the hole should be 25 – 30mm deep and 13mm wide using an adapted drill to control the depth
  5. Space the holes no more than 6 – 8cm apart around the entire circumference of the stump
  6. Drill as close to the bark as possible, because the tree’s transport system is directly adjacent to the bark
  7. Insert Ecoplug Max plugs into each hole with the thicker end protruding outwards
  8. Using a hammer, drive the Ecoplug Max plug in completely so that its head seals the drilled hole, causing the plug to release the herbicide

For best results, stump treatment should be done not more than 2 days after felling

Do not use for any other purpose than treatment of freshly cut tree stumps
FOR USE ONLY AS AN INDUSTRIAL/FORESTRY HERBICIDE.