Settings for ICL spreaders

Achieving precision with ICL spreaders

To ensure precise settings and achieve optimal performance with AccuPro 360ST, AccuPro DROP and AccuPro One spreaders, we  recommend consulting the spreader settings provided on the links above. It’s important to acknowledge that exact application rates, variations can occur based on the specific spreader model used and the operator’s proficiency.

Download your spreader settings

For the specific spreader settings needed, please download using the links provided above.

The latest version of the AccuPro 360ST spreader settings is: Rev 11/24

Spreader settings: A guide, not a rule

Spreader settings are based on a brisk 5 km/h walking pace, but actual spread width varies with speed. For example, applying granular fertiliser at 5-metre centres may cause streaking if walking slower reduces the spread width to 4.4 metres. .

The importance of regular spreader Calibration

To enhance the accuracy of spreading, regular calibration of your spreader is essential. This calibration process should not only focus on determining the appropriate settings but also take into account the effective spreading width. By adhering to these best practices, you can maximise the effectiveness of your ICL spreader and achieve precise application of materials.

Remember, maintaining calibration consistency and taking into account the effective spreading width are pivotal factors in attaining optimal results with your ICL spreader.

Spreader settings for older models

Spreader settings for SR-2000, AccuPro and SS-2 can be found on their archive pages, which can be found in the ‘further reading’ section below.