FAQ: Troubleshooting the AccuPro 360ST – Shutter Plate Issues

What should I do if the shutter plate doesn’t open or close properly?

If the shutter plate isn’t functioning smoothly, here’s what to do:

Step 1: Disconnect the control rod.

Step 2: Slide out the shutter plate. With the control rod disconnected, carefully slide the shutter plate out from its holder.

Step 3: Clean the shutter plate, its holder, and the bolt holes. Thoroughly clean the shutter plate to remove any product build-up or debris that could be affecting its movement. Make sure to also clean the holder (the area where the plate sits) and the bolt holes, as blockages here can hinder smooth operation.

Step 4: Slide the shutter plate back in. Once cleaned, slide the shutter plate back into its holder, ensuring that it moves freely.

Step 5: Reconnect the control rod – After reinstalling the shutter plate, reconnect the control rod and test the shutter plate’s movement to make sure the issue is resolved.

The shutter plate is found underneath the hopper.

Why does the shutter plate get stuck?

Debris, product build-up, or residue in the shutter plate holder or bolt holes can cause the plate to get stuck or not function smoothly. Regular cleaning will help prevent this.

How often should I clean the shutter plate?

It’s good practice to clean the shutter plate, its holder, and bolt holes regularly, particularly after use in areas prone to dust, dirt, or granular build-up.What if cleaning doesn’t fix the problem?

If the shutter plate continues to malfunction after cleaning, inspect the control rod and shutter plate for signs of wear or damage. Replacing worn parts may be necessary for smooth operation.

Following these steps should help resolve issues with the 360ST spreader’s shutter plate and keep it in optimal working condition. Regular maintenance is crucial for long-term performance.