How to use the ACCUPRO 360ST spreader

The ACCUPRO 360ST is a top-quality rotary spreader designed for the application of seed, fertilizer, and other free-flowing materials to turf. To maximize the effectiveness and longevity of your ACCUPRO 360ST, follow the guide below.

Step 1: Pre-operation Check

Before use, inspect the spreader thoroughly to make sure it is clean and free of any leftover material from previous applications.

Step 3: Adjusting the Opening

1. Check that the on/off lever is set to the closed position.
2. On the EasySpread™ dial, select the letter that matches the fertilizer you are using.
3. Choose your desired application rate on the 1 to 25 scale on the handle by securing the adjustment screw at the appropriate number.
4. Specific application rates of specific ICL products can be found on ICL websites or through ICL-authorized dealers.

Step 6: Cleaning and Post-use Care

After finishing your application, always empty any remaining product from the spreader, disposing of excess material properly. The easiest way to remove unused material from the hopper is by turning the spreader upside down. You may need to take additional steps to clear out any leftover material if necessary.

Clean the hopper thoroughly with clean water, paying special attention to the agitator and the hopper’s underside. It is recommended to dry off any excess water. Do not use the spreader again until it is completely dry.