Classic Drop Spreader

Your all-round spreader for optimum coverage and ease of use

To ensure optimum all-round seed coverage and consistent greening for your turf, look no further than the Classic Drop Spreader. Ideal for spreading either grass seed or uncoated fertilizers, you can fertilize large areas up to 950 m2 from a single 32 kg hopper. Apply your seeds with ease thanks to its sturdy build and ergonomic design.

  • Fully assembled

  • Accurate and equal distribution

  • Comprehensive coverage from one hopper

Trail first on a small scale before changing the rate, or any other variables, As circumstances can differ and the application of our products is beyond our control, ICL cannot be held responsible for any adverse results.

1
Dial the adjustment mechanism to 6. You can find this along the vertical metal handlebar shaft. Lay the spreader upside down, with the handle on the ground. Hold it with both hands, with the tires facing up.
2
Using your foot, press the black plastic handlebar trigger to open the gate. The trigger should be parallel to the handlebars when fully depressed. The shutoff bar’s leading edge should be aligned with the calibration line engraved into the bottom of the hopper (the spreader’s plastic storage bin).
3
Using a wrench, turn the black calibration screw at the lower edge of the ‘control wire’ to adjust the alignment. The ‘control wire’ is the cable running from the handlebar trigger to the gate at the bottom of the hopper. Adjust the screw until you have aligned the shutoff bar’s leading edge with the calibration line.
4
Do not use with coated fertilizers.
5
If you need more information, please contact your technical support.




 

 

Brand Details

This product is part of:

Learn about ICL Spreaders